Construction of pouring concrete floors in Nha Trang, Khanh Hoa
Pouring concrete floor at Cam Ranh
Construction of concrete floors in Van Gia - Van Ninh
Rubbing concrete floors in Ninh Hoa
Polishing concrete floors in Nha Trang
Factory epoxy paint in Nha Trang
Construction of pouring concrete basement floor in Nha Trang
Construction and parking of concrete floors at Nha Trang for factory floors are reasonable, right, and according to the right process. After the concrete floor pouring exam, HOANG PHUC CARE committed to helping you have a quality epoxy floor for the factory.
In today's house construction, every stage in the housing construction process from the design stage, the preparation of construction materials to the construction stage needs to be paid attention and studied by the investor. In particular, the process of pouring concrete floor plays an important role.
Therefore, in order to get the most accurate calculation formula thickness of concrete floors will be the factor that helps ensure durability and gloss against damp and slippery as well as saving investment costs in a reasonable way. Best.
The thickness of the concrete volume, the estimated amount of cement for the project is one of the issues that investors / homeowners are most concerned about. To accurately calculate the amount of concrete needed for a project is really not simple. However, for projects of residential houses and townhouses with a volume of around 100m2, this is simply calculated through the following formula:
General formula applied to calculate the thickness of high-rise floors
h = (D/m)Lng (1)
h is considered the overall height, depending on the type of residential, industrial or commercial floor.
Lng is the short wing length.
D is a load-dependent value, usually in the range of 0.8 - 1.4.
m is a type of beam that fluctuates in the range of 30-35.
This formula has numerical values of D and m that fluctuate in a rather large range, so it is not convenient for users. Minimum thickness AIC.
Preparation for pouring concrete floor at Nha Trang:
– Check the core center of beams and floors.
– Check and accept formwork, reinforcement, tree support system, scaffolding to avoid artificial stability.
– Formwork must be coated with non-stick coating.
With the information shared about pouring concrete floors in Nha Trang above, hopefully, it will help you easily calculate and plan the most suitable concrete floor construction for your construction project.
Troubleshooting when concrete meets rain
- With just poured concrete floor:
The heavier the rain, the more it will affect the quality of fresh concrete. The best way is to keep as little water as possible in contact with the concrete surface. Therefore, you will need to assess the amount of rainwater to take the most reasonable preventive measures. To avoid wasting money and effort of workers.
If it rains with small drops, the rain will not harm the freshly poured concrete layer. A little rainwater will be the curing agent for your concrete.
- With concrete floors that have been poured for a long time:
In case the concrete floor is finished a few hours later, you can try it with your hands. If you find it hard enough, you don't need to worry anymore.
In addition, HOANG PHUC CARE also performs the following services:
- Polished concrete floor
- Epoxy paint concrete floors of factories, basements
If you have any needs, please contact us with the following information:
Hoang Phuc Nha Trang Investment Joint Stock Company
Address: Box 6, 10th Floor, VCN Tower Building, No. 02 To Huu Street, Phuoc Hai Ward, Nha Trang, Khanh Hoa
Tel: (0258) 6291888 - Hotline: 0979 275 798